Demonstrating core competence for more than 65 years and a proven reliable partner in the magnetics industry, Micrometals Inc. is an engineering driven company striving to exceed our customers’ requirements for catalog or custom magnetic components.  Micrometals is a privately held corporation which is headquartered in Anaheim, California.  In addition to the U.S. factory, Micrometals has 2 factories in China.  Micrometals offers application engineering and technical support from North America and Chinaas well as stocking warehouses located in Germany and Hong Kong.

Micrometals materials are organized into 3 product groups: Radio Frequency, Power Conversion and 200C Series™.  Micrometals Alloy Powder Cores, formerly Arnold Powder Core Division of Arnold Magnetic Technology, are organized into 6 material groups: Sendust, Molypermalloy, FluxSan™, Hi-Flux™, Optilloy™ and the recently introduced SH High Frequency Sendust.

This new SH Material has high frequency losses that are one third that of traditional Sendust material. The lower loss of High Frequency Sendust will enable it to be used with switching frequencies up to about 5 MHz. This new material was developed to meet the demands of the Power Conversion Industry’s move to the latest in GaN and SiC switching technologies.

Power Conversion Engineers are pushing switching frequencies higher in an effort to reduce cost, minimize size and increase device efficiency.  As a result magnetic component design engineers are challenged to find materials that can operate at 1 - 20 MHz or higher.  The SH Sendust material or traditional carbonyl iron powder materials can be considered as an alternate option for MnZn ferrites which may have increased core loss and the gap losses at this higher frequency or NiZn ferrites for high cost and high hysteresis loss. Sample core kits of both SH Sendust or high frequency iron powder materials are available by contacting the Micrometals sales department or local representative.

The wide variety of material choices can be daunting.  In order to assist the design engineer in the selection process Micrometals has introduced an on-line Inductor Design Software and Inductor Analyzer. This engineering tool is FREE for registered users and is a web-based service that can be acceded on either the Micrometals or Micrometals APC website.

The software part database includes standard catalog parts from both Micrometals and Micrometals Alloy Powder Cores.  Additionally, the user can create custom heights to precisely meet the customer application specifications.

The inductor design calculator accepts inputs for DC inductors or PFC chokes and generates core and winding suggestions based on user defined design parameters.

The design software outputs can be exported for further analysis or individual winding suggestions can be transferred to the Inductor Analyzer feature.  The Analyzer feature allows users to start with a wound core and customize or optimize to change number of turns, wire gauge or consider alternate materials or part sizes and immediately output electrical and dimension characteristics.

Micrometals will gladly extend engineering and design assistance to aid in your core selection.  Please direct application questions to Additional information about high frequency magnetics and the inductor design software is available at our websites:

Questions about samples, price and availability of all products above can be directed to




Provided by Joseph Barbeito,
Director of Sales & Marketing
Micrometals, Inc.