No data to display
Modify main parameters on the left side panel and click “Submit” button to generate data.
| PartNumber |
|---|
| Material |
| Availability |
| DateCreated |
| N |
| AWG |
| Strands |
| Stack |
| I peak-peak (A) |
| Duty Cycle |
| L0 (uH) |
| Ldc (uH) |
| L0 (uH), low level |
| % ( Ldc / L0 ) |
| Ipp(A) vs Phase |
| L(uH) vs Phase |
| Bpk (G), fswitch |
| B (G) at Imax |
| B at Imax/Bsat (%) |
| Core Loss (W) |
| Rdc (Ω) |
| Rac Factor |
| Cu Loss (W) |
| Total Loss (W) |
| ΔT(C) |
| Thermal Aging Check |
| Lifetime (hrs) |
| Core Dim A (in) |
| Core Dim C Stack (in) |
| Ae (cm2) |
| Le (cm) |
| Ve (cm3) |
| Wound Length (mm) |
| Wound Width (mm) |
| Wound Height (mm) |
| Mean Length Turn (cm) |
| Surface Area (cm2) |
| Full or Single Layer |
| ID Use Ratio |
| % Window Fill |
| Dconductor(mm) |
| Dwirehvyins(mm) |
| Dwirebundle (in) |
| Part Grams |
| Total Grams |
| Core $ |
| (Core+Conductor)$ |
| (Core+Conductor+Loss)$ |